The case is JvtiaDuct in Southeast Asia ADTEC project. The warehouse area is 6000 square meters, for large space, the fabric duct is designed in different diameters. The diameters are 700mm, 600mm and 500mm,with the company logo and product reminder, the custom color number 2044C is adopted, the diameter is reduced, and the top height is the same, which is convenient for hanging and installation.The air conditioning equipment is connected to the GI branch pipe and then turns round to connect the seamless fabric duct, which is designed for customers with the application of independent patented technology CFD technology.In the space, different positions in order to achieve customer customized air supply mode, different positions of wind speed, air volume customized air, air supply from the outlet hole, one-way and two-way air direction, hole size and spacing according to different needs to achieve the air supply effect.JVTIADUCT do fabric air duct is professional brand!
The 11th Leman China Swine Conference & World Swine Industry Expo has been held in Changsha, Hunan Province on March 23, 2023, aiming to bring scientific solutions to the pig industry. Share the latest international information and research results in the fields of biosafety, disease prevention and control, diagnosis and detection, pig farm rehabilitation, pig farm construction, pig breeding and production management technology and application, pig nutrition and feed production, pig breeding, pig market and economic analysisJvtiaDuct Fabric Duct participated in the exhibition as a representative of fresh air supply industry. Mainly in the conference to share the use of fabric air duct in the pig house and the air supply system of fabric air duct.
Three methods of air duct calculation: static pressure recovery method assumed wind speed method such as friction method of air conditioning wind system pipe design (a) In the design of pipe machine must first understand the three parameters from the product data: air volume, wind pressure, noise. 1. Air volume: To determine the size of the air supply pipe. 2. Wind pressure: also called external static pressure. In order to calculate the parameters needed to overcome the resistance in the process of air supply. Simply, or not exactly, how far the wind can travel. 3. Noise: the noise of the product technical data is only relative, because the noise changes with different conditions. Noise may be generated by the following channels: the fan of the machine itself, the vibration of the machine operation, the excessive pressure of the supply air, etc. (2) The main contents of the design of the air duct system include: reasonable use of the air velocity in the pipe to determine the section size of the air duct, calculation of the resistance of the air system and selection of fans, balance the resistance of each branch of the air duct to ensure that the air volume of each branch of the air duct reaches the design value. So how to choose the wind speed in the pipe? How to determine the size of the air duct? ※ The selection of wind speed in the pipe determines the size of the section of the pipe. The relationship between the two is as follows: F=a×b=L/(3600• V) (Formula 1-1) in the formula: F: pipe section area (㎡) a, b: pipe section length, width (m) L: duct air volume (m³/h) V: wind speed (m/s) The above values are affected by the following aspects: ① building space: In modern buildings, whether multi-storey buildings or high-rise buildings, or high-grade villas, the building space is quite tight, so we are required to improve the wind speed as much as possible to reduce the section of the air duct. (The wind speed in the pipe is inversely proportional to the cross-sectional area of the air duct, that is, the higher the wind speed, the smaller the cross-sectional area of the air duct; on the contrary, the lower the wind speed, the larger the cross-sectional area of the air duct.) (2) Fan pressure and energy consumption: the higher the wind speed, the greater the wind resistance, the greater the energy consumption of the fan, and from this point on to reduce the wind speed. (3) Noise requirements: The influence of wind speed on noise is manifested in three aspects: First, with the increase of wind speed, the fan pressure requirement is higher, which causes the fan operation noise to increase; Second, when the wind speed increases to a certain extent, airflow noise will be generated when passing through the air duct components; Third, with the increase of wind speed, the noise reduction ability of the air duct. In general, the higher the wind speed in the duct, the greater the noise generated. Therefore, the selection of wind speed in the pipe is a result of comprehensive balance of various factors. Through access to relevant information and relevant manuals and according to the experience of the actual project.
The project is a Frozen food logistics cold storage in Malaysia. The cold storage adopts 12 air coolers combined with Jvtiaduct fabric air ducts to cool the air in the storage, solve the problem of air distribution in the storage, and ensure the control of temperature and humidity of the stored goods.According to the architectural characteristics and air supply requirements of the project, Jvtiaduct uses design software to make selection design, and uses CFD technology to simulate the application space air distribution. The specific design is as follows:The circular series fabric air duct is adopted.The height of the cold storage is 5m. The fabric air duct adopts double row suspension system and is mounted on the top.The air supply mode of fabric air duct is infiltration air supply and orifice air supply. The end of freezing room is set with jet nozzle, and the orifice is designed in straight row, so that the air supply covers a wider area.