Do you know what are the characteristics of the South Air duct? Let's take a look at it together! Hope to help everyone. One; the face-style air blows, the air volume is large, and there is no feeling of blowing. The South system adopts the unique air outlet mode of the entire pipe wall fiber infiltration and microporous jet flow. The air outlet area is large, the air volume is large, the wind speed is low, there is no blowing feeling, and the comfort is excellent. Second; the overall air supply is evenly distributed. The South system blows out the air through the fiber gaps of the entire pipe wall or evenly distributed rows of small holes designed, and the air distribution is uniform at every point, realizing a truly ideal overall uniform air supply. Three; anti-condensation. The South system penetrates the cold air through the entire pipe wall fiber to form a cold air layer outside the pipe wall, so that there is almost no temperature difference between the inside and outside of the pipe wall, completely solving the problem of condensation, and does not require pipe insulation. Four; easy to clean and maintain, healthy and environmentally friendly. Because the South system is easy to disassemble and assemble, it is convenient to wipe and clean the pipes to improve the clean quality of indoor air and meet the higher requirements for health and environmental protection. Five; beautiful and high-end, diverse colors, outstanding individuality. A variety of colors can maintain harmony with any indoor environment, simple and high-end. At the same time, the system and color are fully personalized and customized. Six; light weight, the roof load is negligible. The Soth system is woven from special fibers and has a very light weight, about 1/40 of the traditional metal wind system. It is especially suitable for places where the roof has no load-bearing capacity. Seven; The system runs quietly and improves the environmental quality (The Soth system has soft material, low wind speed during operation, will not produce and transmit resonance, quiet, and improve environmental quality). Eight; installation is simple, shorten the engineering cycle. The South system adopts a special supporting steel rope or aluminum rail suspension device system, which is simple and quick, and the installation time is often more than 1/10 of the traditional system, which greatly shortens the engineering cycle. Nine; Flexible installation and reusable. The whole system is made of soft materials, and there is no need for trim calibration during installation. When in use, it will not be as easily scratched, dented, and leaked like a metal pipe system, and the system suspension device is flexible, easy to install, and reusable. It is good in all kinds of places that require temporary ventilation. Choice. Ten; system cost is fully saved and cost-effective. The design scheme of the South system is simpler than the traditional air supply system, and it replaces the traditional air supply pipes, dampers, diffusers, air outlets and other components, accessories, and a single product such as thermal insulation materials. The weight is extremely light, transportation and installation are simple, and overall savings are achieved. The total cost of the system.