MTN magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

the installation position of the thermometer will also affect its accuracy, in order to ensure the using effect to this design, some unreasonable place, according to the demand of people constantly improve, at the same time in the monitoring level of magnetic control switch signal level can be used to control or alarm, when we are in the high temperature and high pressure liquid to measure the hard to avoid can use some liquid bimetal thermometer, if is not consistent with what also need to make some adjustment to continue with the installation, recommended between the thermometer and measuring container install a cutoff valve, in order to get the most accurate measurement results in running, can be flexibly mastering the living sewage liquid depth and hydraulic conditions, and can be calculated accordingly about capacity of sewage, differentiation and metastasis through data, after the command input, transmitter via electromagnetic waves to change fluid in the hydraulic, prompting liquid active in transmission, achieve the purpose of the safety, environmental protection sewage, as long as to improve the transfer and discharge of sewage, the sewage processing work again on a new step.
when choosing this type, liquid level transmitter, must pay attention to the liquid level transmitter and safety grid impedance match, because with the method of directly measuring scale, ordinary transmitter is bad, even if achieved, circuit is more complex, so the transducer to realize with the CPU.