Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

+86 13816377866    |    jimmy011@126.com

Thermocouple head

Thermocouple is the basic structure and principle of application of _ the meter

by:JVTIA     2020-10-29
1) high precision measurement. Because of thermocouple direct contact with the object being measured, not affected by intermediate medium. (2) the measurement range. The commonly used thermocouple from - 50 ~ + 1600 ℃ can renew edge measurement, some special thermocouple low measurable to - 269℃( Such as gold iron nickel chrome) Up to + 2800 ℃ ( Such as tungsten rhenium) 。 3. Simple structure, easy to use. Thermocouple is usually composed of two different kinds of metal wire, but is not limited by the size and the beginning of, outside has protective casing, which are very convenient. Basic principle of thermocouple temperature measurement will be two different material a conductor or semi-conductor a and b welding together, form a closed loop. When the conductor a and b two persistent point temperature difference between 1 and 2, occurs between the electromotive force, thus forming the size of a current in the circuit, this kind of phenomenon called the thermoelectric effect. Thermocouple is in using this effect to work. Thermocouple type and structure form of thermocouple types commonly used thermocouple can be divided into two categories, thermocouple and non standard thermocouples. Using standard thermocouple refers to the standard specifies the thermoelectric potential and the relationship between temperature, permissible error, and a unified standard score table of thermocouple, it has with matching display instrument to choose from. Non-standard thermocouple or on the order of magnitude less than the range using standardized thermocouple, generally no unified indexing table, mainly used for the measurement of some special occasions. Standardized thermocouple since January 1, 1988 in our country, the thermocouple and thermocouple were manufactured according to iec international standard, and specify the s, b, e, k, r, j, t ( The index number) Standardization of seven thermocouple type thermocouple for our country unified design. The structure of thermocouple (1) into the thermocouple two electrode welding must be strong (2) the two hot electrode should be well insulated between each other, in case of short circuit (3) compensation conductor should be connected to the free cod of a thermocouple to be convenient and reliable (4) protect casing thermal electrode should ensure sufficient isolation and harmful medium. The thermocouple cold end temperature compensation due to the thermocouple materials are generally more expensive ( Especially when using precious metals) And temperature measuring points are far away the distance to the instrument, in order to save thermocouple materials, reduce cost, usually adopt the compensating conductor (of the cold junction of the thermocouple The free end) Reaches to the relatively stable control indoor temperature and connected to the meter terminals. It must be pointed out that the role of the thermocouple compensation wire only extend thermal electrode, make moves to the control room of the cold junction of the thermocouple meter terminal, it itself does not eliminate the cold end temperature change on the influence of temperature, no compensation. So, still need to take some of the other correction method to compensate of the cold end temperature t0 indicates influence on measuring temperature 0 ℃. Must pay attention to when using thermocouple compensating conductor model match, cannot be wrong polarity, compensation conductor should be connected to the thermocouple temperature should not exceed 100 ℃. For example: s type thermocouple) Platinum rhodium - 10 Platinum thermocouple platinum rhodium - 10 Platinum thermocouple ( S type thermocouple) For precious metals thermocouple. Accidentally wire diameter provision of 0. 5 mm, allowable deviation - 0. 02 mm, the positive electrode ( sp) In the name of the chemical composition of platinum rhodium, contain the rhodium is 10%, platinum-based is 90%, the cathode ( sn) For pure platinum, commonly known as single platinum-rhodium thermocouple. The temperature is 1300 ℃, the long-term use of thermocouple short-term use temperature is 1600 ℃. S type thermocouple in the thermocouple series has high accuracy, good stability, test your area wide, long service life, etc. Its physical and chemical performance is good, the thermoelectric potential stability and oxidation resistance at high temperature performance is good, suitable for oxidizing and inert atmosphere. S type thermocouple deficiency is thermoelectric potential, thermoelectric potential rate is small, low sensitivity and mechanical strength under high temperature to drop, is sensitive to pollution, precious metal materials is expensive, and one-time investment is larger.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...