In the ventilation and cooling project of the workshop, the processing and installation of ventilation pipes for environmental protection air conditioners is a very important link. There are some specific requirements and specifications for the processing and installation of ventilation ducts. This is what all individuals or enterprises that process ventilation ducts and undertake ventilation and cooling projects should study and study. What are the specifications for the processing of ventilation ducts? Precautions before processing ventilation ducts: One: Specifications. The specifications mentioned here are the basic specifications of the ventilation duct, the size and size of the ventilation duct we need. It is worth noting that when determining the specifications, we need to contact the use of air conditioners. Only in this way, we can ensure that after the specifications of the ventilation ducts are set, they can be connected with the air conditioners, and play their functions to complete their functions. Effect. Second: type. There are many types of ventilation ducts. Different types of ventilation ducts are used in combination with air conditioners, and the effects are different, especially the thermal insulation ventilation ducts. Therefore, if we want to process ventilation ducts and make them work better with air conditioners, then we should also consider their types before processing, which is a good condition for us to ensure that they work efficiently and play an advantageous role. . In summary, before the ventilation duct is processed, the ventilation duct should be combined with the basic situation of the air conditioner, and attention should be paid to the specifications and types of the ventilation duct. Different air conditioners require different ventilation ducts with different specifications and types. Therefore, when processing ventilation ducts, more consideration should be given to the above conditions. Specifications for the processing of ventilation ducts: 1. In order to ensure the strength of the air ducts after processing, 20mm aluminum foil should be reserved on one side of the adhesive part for edge protection during cutting; , Check whether the seam is tight and whether the size meets the requirements. Determine the best bonding time according to the seasonal temperature, humidity and the performance of the adhesive. After bonding, use a square ruler and a steel tape measure to check, adjust the verticality and the diagonal deviation should meet the regulations. 3. When processing ventilation ducts, do a good job in protecting the finished products of on-site plates and prefabricated pipes. 4. After connection and installation, the bonding seam should be checked. After bonding, it should be flat and should not be skewed. Defects such as dislocation, local cracking, and gaps above 2mm. 5. The distance between the duct support and hanger should meet the regulations. The above is the introduction of the ventilation duct processing specifications. Have you learned new knowledge after reading it? If you are also troubled by the processing of ventilation ducts, you may wish to pay attention to consulting our Jinrong ventilation.
Finding a reliable solution for the resistance temperature detector temperature sensor manufacturers not only supports operation of the entire system but also enhance the beauty of your workplace.
We believe our ability can raise a giant wave of innovation among the field of temperature sensor.
The success of resistance temperature detector of campaigns largely rides on how you market your company to the crowd.