Commonly used fabric duct ventilation duct interface, fabric duct ventilation duct connection, scientific research, otherwise it is likely to cause fabric duct damage, resulting in excess damage, the following fabric duct ventilation duct manufacturers will carry out several types of common fabrics Comparison of air duct and air duct interface methods, so that readers who have doubts about these aspects try to have a deeper understanding of fabric air duct and air duct connection. What are the connection methods of fabric ducts and ducts? What are the general connection methods of fabric ducts and ducts? The connection part should be firm and firm, rectangular frame, accurate positioning of the four corners of the ventilation duct and sealing measures. The ventilation duct connection method has two sides that are straight, non-displaceable and twisted. The following are several common ways in our daily life: 1. Spiral duct hoop connection. The hoop type connects the two sides of each pipeline into cold-rolled ribs, and shrinks one end into a hole. When installing, insert the hole into the small hole according to the direction of rotation, and fasten the two pipe ends with steel tow hoops on the outside. Connect, and then fasten it in the earrings with the foot bolts, so that they are not tightened. 2. The fabric air duct and air duct plug-in connection are mainly used for rectangular frame or annular air duct connection. First connect the air duct, then insert it into the air ducts on both sides, and then use self-tapping screws or rivets to connect the air ducts. The pipes are fixed and inseparable. 3. The fabric air duct and the air duct are inserted into the seedling connection. The seedling connection and the rectangular frame connection are inserted into the two sides of the ventilation duct, and then compacted. 4. Fabric air duct and plastic hose connection. The plastic tube connection is mainly used for the connection and installation of the fabric air duct and the components (such as the diffuser, the positive pressure air supply port on the side of the static pressure box, etc.). The card clamps the plastic tube tightly.
temperature sensor temperature sensor manufacturers has gained a lot of popularity over the recent past.
To learn more about resistance temperature detector， give us a call at Shanghai Jiutian Automation Equipment Co., Ltd or visit us online by going to Jiutian Temperature Products.
Apart from this, exhibit myriad RTD supplier benefits, like the prevention of temperature sensor manufacturers by enhancing RTD supplier.
Shanghai Jiutian Automation Equipment Co., Ltd offers the best for indoor as well as outdoor use. To find your ideal at attractive offers, visit us at Jiutian Temperature Products.