485 alternating current temperature sensor manufacturer quality assured and reliable

The characteristics of the current temperature sensor

both open loop and closed loop hole temperature sensor principle, basic performance difference is not big, basic advantage: fast response time, low temperature drift, high precision, small volume, wide frequency band, strong anti-jamming capability, overload ability.

how selection - — Current temperature sensor

A, choose current temperature sensors need to pay attention to the hole size can ensure wire can be through the temperature sensor;

B, choose current temperature sensor when the need to pay attention to the application environment for high temperature, low temperature, high humidity, earthquake and other special environment;

C, choice when need to pay attention to the space structure whether meet the current temperature sensor.

current temperature sensor - — Electromagnetic compatibility

electromagnetic compatibility EMC, ( 电- - - - - - 磁兼容性) Is the study of electrical and electronic equipment that can perform their respective functions in common electromagnetic environment state of coexistence, the requirements of the various devices in the same electromagnetic environment can work normally and noninterference, achieve 'compatibility' state a discipline. The deterioration of space electromagnetic environment is more and more easy to make electronic components caused by incompatible between false action in the system, so the electrical and electronic equipment electromagnetic compatibility testing is very necessary. Due to the urgent needs of the actual production, scientific research and marketing, has passed the electromagnetic compatibility test a consensus has emerged among current and voltage of temperature sensor, and has become a compulsory standards.

current temperature sensor using note

1. In order to get a better dynamic characteristics and sensitivity, must pay attention to the original coil and deputy while coil coupling, coupling well, available single wire and wire completely fill the hole temperature sensor module aperture;

2. Used as the dc current flows through the temperature sensor of the original side coil, and the secondary circuit without | stabilizer or vice side open circuit, power supply is connected, the magnetic circuit is magnetized, remanent magnetization, the influence and measuring accuracy, So use to connect the power supply and measure the end M) , when this happens, first to demagnetization. The method is a circuit without power, and by the same level in the primary side coil alternating current and decreases the size of its value;

USES current temperature sensor module note

current temperature sensor will direct current voltage power frequency signals, such as isolation into a 4 - 20mA/0- 10 v, etc all kinds of standard signal on both ends of the semiconductor chip to control the current I, and applying magnetic induction intensity in the vertical direction of the wafer for B and strong magnetic field, is in the direction perpendicular to the current and magnetic field, will produce the electric potential difference as UH voltage.

when measuring current, the use of single wire temperature sensor module aperture, in order to get a better dynamic performance and sensitivity.

the better accuracy of the temperature sensor module was measured under rating, when measured value is lower than the rating, the original with many winding coils, the total ampere turn close to the rating, in order to gain a better measurement accuracy.

when use current temperature sensor module, vice side should be connected to the power supply, then turn on the primary side current or voltage. Current bus temperature shall not exceed 100 degrees.

when choosing temperature sensor module, according to the measuring range, accuracy, reaction time and the parameters such as connection mode, choose different models of temperature sensor.