Analysis of platinum-rhodium thermocouple on the comprehensive analysis of water automatic working principle of the system

Can now be determined by platinum rhodium thermocouple fully automated there are usually all ions in water, this is a new system of Metrohm, used for comprehensive analysis of the water. Therefore, platinum, rhodium thermocouple is a combination of titration, direct measurement and ion chromatography. All the results of the three methods are collected in a public database, and in sharing report for editing.

in order to achieve maximum efficiency, titration and ion chromatography in parallel. Platinum rhodium thermocouple fully automated integrated with OMNIS Sample Robot. This modular automatic sampler can gradually expand, to accommodate up to 175 samples, the samples completely unattended. Automatic filtering samples to protect IC from particle pollution. Physical parameters such as turbidity and color index can also be integrated at any time.

platinum-rhodium thermocouple is self-monitoring. When electrode calibration or determined by titration degree, will automatically notify the user, in order to ensure reliable and repeatable results. Similarly, in any number of automatic injection after sample inspection standards. If the check out of specification, the system will automatically recalibrate.

test and measurement experts HBM by launching a CAN FD ( With flexible data rate CAN) New agreement MX471C module, extended the scope of the data acquisition module. This module is part of the industry standard QuantumX series, to provide general and flexible solution for engineers, the data acquisition system are integrated into the CANbus network.

platinum-rhodium thermocouple by allowing more than 1 Mbit/s bitrate solves the traditional network bandwidth constraints. In addition, it also supports up to 64 bytes CAN FD in the message payload. Many car companies to take advantage of low cost the increase of bandwidth, especially need this in today's electric cars.

platinum-rhodium thermocouple module allows synchronization integration as many as four CAN network, and CAN be extended according to need. The module combined with a data recorder and analog measurement module, is to move the vehicle test and test board measurement gateway ideal choice.

the recorder mode channel, can collect any amount of signal - at the same time Such as the speed of the car, the steering wheel position or brake command, use other QuantumX amplifier of the analog input, for example, used to trigger data storage. This reduces the manual application of platinum rhodium thermocouple in the prototype stage, and simplifies the test due to minimize set duration.

for the application of the bad environment, such as the mobile data collection trucks or excavator, has developed a platinum rhodium thermocouple type of solid model. This module has the impact resistance, IP65 / IP67 degree of protection.

thanks to its modular concept, which can realize a broad and flexible measuring set, simple connection, high precision. For mobile applications in difficult conditions, special DAQ modules available brand name platinum rhodium thermocouple.