Analysis of thermal meter inspection steps

When we want to inspection on thermal meter, the first thing we will check every day. Then we should specific from what respect to check? Let HuiXin thermal meter to tell us all about, the hope can give you homework help.

we want to see if the light on the instrument and record is normal, and display instrument control room instrumentation instructions instructions are the same, the location of the controller is the same. Also look at the power and gas source is in a scope inside. HuiXin thermal instrument of heat preservation and mixed hot how. If there is any leakage problem, and see how he's in good condition.

we have regular drainage, so when we are in the sewage which problems we should pay attention to? When we before the sewage, we want to contact the operator and, after approval to homework, if it is to flow or pressure for drainage, then we will change automatically to manual. To give him the guide of the positive and negative pressure pipe slowly open, make material and dirt into the container.

if the poor quality of the valve, it makes the blowdown valve switch back and forth several times, and then also questions about the undead, this time we need to do the corresponding emergency treatment, there is this can prevent leak problem. We have to look at the indicating instrument, wait for everything is all right, we can replace manual in with automatic. ( Figure/http://www. wuxiyibiao。 com/)