Ceramic heating coil

Ceramic electric heating coil used way is not the general mica torsion line production, but the article adopts the ceramic wear silk way, so the product's power is higher than normal to zero. 5 ~ 1. 5 times. Heating element for wire imported round ceramic article torsion spring shape wear into the ceramic ring, cover adopts Japanese stainless steel, high temperature heat insulation cotton ( Aluminum silicate fiber board) To prevent temperature were leaked. Article ceramics is a high frequency is characterized by good heat transference and ceramic hard non-friable, high temperature deformation is not easy to aging, etc. Ceramic heating coil by high frequency porcelain, fine to wear more than domestic nickel chromium alloy 2080, such as silk, pure hand-made, power, heat stability, durability, injection molding machine, blown film machine, granulator preferred heating accessories, fast heating, high power, than ordinary heating energy saving of 20% to 30%.

1, quick heat transfer, even heating, work stability.

2, temperature does not leak, can save electricity, housing touch is not hot, job security.

3, high power products, the ceramic article to wear silk way power is higher than normal to 0. 5 ~ 1. Five times

4, high temperature resistant heat wire, heat faster, even heating, high temperature stability and other characteristics, can be used for a long time in the 600-800 ℃.

5, long product life, because of the raw materials at high temperature aging slowly so long product life.

6, comply with the national GB all technical requirements. Power deviation ∽ + 5% to 10%.

7, electric strength, the voltage is 1500 v / 50 hz sinusoidal ac voltage test, the 1 min without breakdown phenomenon.

8, high mechanical strength, thermal insulation performance is good, and heated object interface is big, long service life.

9, convenient installation, maintenance, use cost is low, even if the internal heating material damage, and external ceramic device can still be reuse.

the brief performance of ceramic heating coil: it is mainly suitable for extrusion, casting and machine operating temperature can reach 450 degrees, * 6 big surface load. 5W/cm. Is characterized by long life high temperature resistant, 30% lower energy consumption, high insulation, is currently the extrusion machines, injection molding machine, blown film machine * applicable electric heating products.

ceramic heating coil: divided into white porcelain and red ceramic heating coil.

ceramic heating coil ordering information:

1, the electric heating circle size: inner diameter ( mm） X height ( mm） Thickness: 3 mm 5 mm

2, voltage, such as: 380 v, 240 v, 230 v, 220 v, 110 v, 36 v, 24 v, 9 v. 。 。 Such as

3, power: on-demand customization, we usually according to a 1 cm square. 5 w - 4 w to do.

4, temperature is 200 - Optional 750 degrees Fahrenheit ( White porcelain under 450 degrees, 450 degrees more than red ceramic) 。

5, hole, square hole, round hole, position and diameter of

6, qualification: ceramic joints, high temperature wire, screw wire, plug line, flexible.