Discuss should be how to deal with the fault and overhaul thermal meter

Now, thermal meter has been widely used in chemical plant, and it has played an important role. When we use thermal meter, may have some trouble, need for maintenance at this moment, so we should be how to do? Let no XiHui xin thermal meter to tell us a specific answer. Thermal meter when use, often should check, if found fault, should be ruled out in time. At the same time, also to check on a regular basis. Because thermal meter is mainly used in pressure, liquid level control, and traffic transportation, which should be the hydraulic control system as the key monitoring objects. To the correct adjustment of heating power, can effectively control the water temperature, to prevent inaccurate measurement data, and thus affect the normal operation of the instrument. For us, we should pay attention to two aspects of fault, it is caused by the hydraulic control system, because if the system appear problem, so will affect the accuracy of the instrument to measure, so as to affect the whole system; 2 it is caused by the thermal meter itself fault, it can also cause the measurement data is not accurate, so as to mislead the normal work, affect work efficiency. In the event of failure, then we should carry on the repair, first is tested, can according to the automatic control system of record curve to judge the fault. If the curve of fluctuations in line, or stop, it should be the instrument. If you can't use manual to control the fluctuation of curve, so the problem of process operation. In peacetime, we should regularly to calibrate the instrument, to ensure the accuracy of instrumentation and reliability, so as to guarantee the stability of system is able to run. Also check regularly, can use some tools. In short, we want to scientific analysis, failure to adopt effective measures, and make corresponding records, to allow a safe and effective for the production. ( Figure/http://www. wuxiyibiao。 com/)