loading

Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

Four kinds of common faults and solve thermal resistor

Thermal resistance is more common temperature detector, not only is widely used in industrial measurement, also be made into standard benchmark thermometer for use, below small make up to introduce four kinds of common faults and solve thermal resistor.

a, failure of the main performance: heat resistance showed to the indicated value is lower than the actual value or values appear unstable phenomenon; The cause of the failure: the protection of the thermal resistance tube metal debris and dust, dirt, the connections between or heat resistance short-circuit phenomenon; Settlement way: remove metal scraps, dust and water clean, find the location of the thermal resistance in short circuit, strengthen its insulation. Second, the failure of main performance: heat resistance indicator appears is infinite; The cause of the failure: heat resistance or lead wire short circuit, but it is possible that the wiring terminal loose occur; Settlement way: change the resistor body directly, or will be welding wire drawing and tighten. The main performance of the three, failure: shown on the display instrument of thermal resistance value is negative; The cause of the failure: shows the connection between the instrument and heat resistance of errors, or heat resistance short-circuit phenomenon; Settlement way: the wiring connection again, or find the correct short circuit position, strengthen its insulation. The main performance of the four, fault: the relationship between the thermal resistance value and temperature changed; The cause of the failure: heat resistance wire appeared corrosion or deterioration; Settlement way: will heat resistance to change.

GET IN TOUCH WITH Us
recommended articles
NEWS
At present, more and more customers on the market are just beginning to attach great importance to the hidden dangers of the application of air disc machines and equipment.
Ventilation duct manufacturers talk about three welding methods for fabric ducts: Method 1: Manual welding.
It should be erected by the scaffolder according to the special safety construction organization design (construction plan) or safety technical measures.
Compliance Standards and Common Problems in Ventilation Duct Equipment Many bosses generally ignore the smoke exhaust system and natural ventilation planning of the restaurant kitchen when they open a new restaurant, which eventually leads to the closure of the hotel for renovation, renovation or sale of serious losses.
Ventilation pipe ventilation pipe manufacturer is a hollow pipe used for ventilation.
When we want to enter an industry and decide to dedicate our light and heat, our calm choice is to analyze this market well.
How to ensure the construction quality of dust removal fabric duct ventilation duct? In order to promote the construction of dust-removing fabric duct ventilation ducts, we should formulate some drastic measures.
How does the ventilation duct manufacturer ensure the construction quality of the ventilation duct for the dust removal fabric duct? 1.
There are common pipes everywhere in daily life, and it is not clear what to do.
Ventilation ducts are metal or composite ducts for ventilation in industrial and civil buildings.
no data

CONTACT DETAILS

Phone: +86 13816377866
Email: jimmy011@126.com
Add:NO999, Sunqiao RD, Pudong area, Shanghai, China
 

CONTACT US FOR FREE SAMPLE !

For more products related question ,Welcome to inquiry us .

Copyright © 2019 Shanghai Jiutian Automation Equipment Co., Ltd. | Sitemap
Customer service
detect