From material selection and installation on eyes looked into type liquid level transmitter!

JdG magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

the inputting type liquid level transmitter is based on the measured liquid static pressure is proportional to the height of the liquid in the principle of using diffusion silicon or ceramic piezoresistive effect of sensitive element, the static pressure into electrical signals. After temperature compensation and the linear correction. Is transformed into 4 - 20 madc standard current signal output. Input type liquid level sensor part of the transmitter can be directly into the liquid, transmitter part available flange or bracket, convenient in installation.

1, the thermometer is installed in the stillness of the deep well, sink, usually the bore diameter & Phi; About 45 mm steel pipe ( Different height to play several holes, so that the water flow into the tube) Fixed in the water, and then input type liquid level transmitter can be used in the steel pipe.

2, measuring or have a mixing liquid level of liquidity, usually the bore diameter & Phi; About 45 mm steel pipe ( Different heights on the opposite side of the liquid flow to play several holes, so that the water flow into the tube) Fixed in the water, and then input type liquid level transmitter can be used in the steel pipe.

3, the installation of the transmitter is in the vertical, the inputting type installation position should be far away from the liquid exit and blender.

4, in a larger vibration using occasions, can be on the transmitter winding wire, using the wire vibration, in order to avoid magnetic flap snap cable JdG thermometer thermometer | | glass tube floating ball | | glass thermometer thermometer two-color thermometer

JdG magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

the inputting type liquid level transmitter of the material structure:

1: adopt the whole structure of laser seal welding of stainless steel, has the good moistureproof ability, and excellent media compatibility.

2: using self-developed amplifying circuit greatly improve the stability of sensor signal output, reduced due to the sensor into underwater depth of sensor feedback signal.

3: using the diffused silicon piezoresistive core body or ceramic piezoresistive core body, the sensor can at any time can can reflect the change of liquid level, a more accurate measurement results.

4: on the basis of the original amplifier circuit increases the lightning protection electric circuit, the effective protection input type liquid level sensor/transducer used in the field of security. More consulting web: JdG magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

JdG magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

JdG magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

recommended reading: in 2013, the international competitiveness of domestic liquid level transmitter is still significant