General seismic pressure gauge installation points1

General seismic pressure gauge installation points

1 meter using the environment temperature is 40 ~ 70 ℃, relative humidity is not more than 80%, such as deviated from its normal use 20 + 5 ℃ temperature, temperature must be included in the additional error.

2 meter must be installed vertically, makes every effort to maintain the same level with measuring points, such as the difference between high included in the additional error caused by the liquid column, but don't have to consider when measuring gas. When installation will watch case vent at the back of the jam, lest affect explosion-proof performance.

3 meter should avoid vibration and impact, so as to avoid damage.

4 when placing order, please indicate: instrument type and name; Instrument measurement range; Instrument and other precision grade deviation is packaging requirements.

5 special design according to the needs of users.

6 meter normal use measuring range: under the static pressure is less than 34 measuring limit, under the volatility should not be more than 23 measurement limit. In the case of the above two kinds of pressure big pressure gauge to measure the minimum should not be below the lower limit of the 13, when measuring vacuum vacuum parts all use.

7 if the instrument when using a pointer failure or internal parts of fault should be loose, does not work for maintenance, maintenance or contact the manufacturer.

8 before installation should check whether the instrument model, specifications, precision grade conform to the requirements of the instrument to use. Check the instrument and installation of the nipple which is female.

9 gauges should be installed vertically, are rarely more than 30 ° inclination, and strive to maintain the same level with measurement point, lest bring indication error.

10 after installation, in the case of without pressure, observe whether the pointer in zero or close to the nail plate check, or unfavorable use.

11 measuring steam pressure, the lower pressure gauge shall be equipped with circular tube, the use of water to steam pressure, in order to avoid high temperature steam into spring tube, effect the precision of instrument, or inadvertently make the solder melts, meter leak, caused by accident or burns.

the customer respect and god:

a: hello, is the development of a technology to create high quality company, and to provide users with high-quality products and perfect solution. The main products are PT100 temperature sensor, thermocouple, temperature sensors, pressure sensors, liquid level sensor and all kinds of instruments and meters, etc. Such as temperature transmitter, pressure transmitter, etc.

our company insist on quality first, the customer for this, innovation as the purpose, with a firm pace, scaling new heights, for the Chinese nation instrumentation industry dedicated his own strength, hope that the new and old customers to the choose and buy the desired products. We will serve you wholeheartedly!