Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

+86 13816377866    |    jimmy011@126.com

Thermocouple head

How to distinguish the thermocouple _ instrument

by:JVTIA     2020-10-28
Working principle of the thermocouple is closed loop by the two different conductor material composition, when both ends exist when the temperature of the ladder, can produce a loop, and there will be an electric current passes through the loop, while the existed between the electrical energy on both ends, and that this power is called thermoelectric emf, this is called the seebeck effect, seebeckeffect) 。 Thermocouple method to distinguish two different conductor material is hot electrode, and here, if the temperature is high, the normal work of the end for end, on the contrary, the other end of the low temperature is the free end, usually under the condition of free end, he is under a state of constant temperature. According to the thermoelectric emf as a function of temperature, the thermocouple indexing table; Indexing table is free end temperature at 0 ℃, under the condition of different thermocouples with different indexing table. Thermocouple of the whole circuit, if access to a third metal materials, and the material when the temperature of the two contact, generated by the thermocouple thermoelectric is set to remain the same, which is not affected by the third metal access in the loop. Therefore, when the thermocouple temperature measurement, can be connected to the measuring instrument, measured after the thermoelectric emfs, can know the temperature of the measured medium. Thermocouple measuring temperature to the cold end ( Measure the end for the hot end, by the end of the lead connected to the measurement circuit is called cold junction) Temperature remains constant, the size of thermoelectric potential and measured temperature in certain proportion relationship. When measuring, the cold end ( Environment) Temperature changes, will seriously affect the accuracy of measurement. Take action at the cold end compensation due to the impact of the cold end temperature change is called the thermocouple cold junction compensation is normal. Connected to the measuring instrument with special compensation conductor. K type thermocouple is above 500 ℃ of dosage big metal thermocouple temperature measurement area, its usage is the sum of other metal thermocouple. Thermocouple how is negative what are negative to the positive ( kp) In the name of the chemical composition is: ni: cr material 90:10, the cathode ( kn) The chemical composition is: ni: si material 97 k type thermocouple linearity, thermoelectric emfs, larger so can be used for oxidizing, inert atmosphere. But k type thermocouple cannot be directly used for sulfur, reducing or at high temperature reduction, oxidation atmosphere and vacuum alternately, is also not recommended for people with weak oxidizing atmosphere. It is very nickel-chromium alloy (containing 10% chromium kp) , the negative is extremely containing silicon 3% nickel silicon alloy ( kn) 。 Therefore, thermocouple how points are negative, based on this feature, use the magnet can be easily identified thermocouple of positive and negative pole.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...