Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

How to install the testing water thermocouple sensor

2020-11-11

JVTIA

204

Water is the main principle of the thermocouple sensor conductive liquid, is to use electrodes to detect whether there is water, then with thermocouple sensor into a dry contact output. Generally water soak thermocouple sensor is normally open, if you want to normally closed thermocouple sensor will need to be booked in advance.

water thermocouple sensor is mainly used the water detection cable with the installation of fittings fixed in detecting area; After power up a green indicator is a sign of the power supply is normal; Times of water conductivity is higher than the warning threshold when the red warning light will be bright, and the collector output short-circuit alarm signal, remove water, red light will automatically put out, once again have the water will be back in the emergency state; Or output alarm signal (open Jump line selection) ; According to field ground water damp rotating knob switch adjust the sensitivity of the detector ( See the sensitivity range) Can also be used for the ground is too wet alarm detection.

more high quality thermocouple sensor

key words: thermal resistance, thermocouple, thermal resistance, platinum resistance, PT100, PT1000, pressure thermocouple sensor, digital temperature thermocouple sensor

GET IN TOUCH WITH Us

Safety standards for fan coil units of spiral duct manufacturers

At present, more and more customers on the market are just beginning to attach great importance to the hidden dangers of the application of air disc machines and equipment.

Ventilation duct manufacturers talk about three welding methods for fabric ducts and ducts

Ventilation duct manufacturers talk about three welding methods for fabric ducts: Method 1: Manual welding.

Several ways of connecting ventilation pipes

It should be erected by the scaffolder according to the special safety construction organization design (construction plan) or safety technical measures.

Compliance Standards and Frequently Asked Questions in Ventilation Ducts

Compliance Standards and Common Problems in Ventilation Duct Equipment Many bosses generally ignore the smoke exhaust system and natural ventilation planning of the restaurant kitchen when they open a new restaurant, which eventually leads to the closure of the hotel for renovation, renovation or sale of serious losses.

How many sides does the ventilation pipe have? How to choose in general?

Ventilation pipe ventilation pipe manufacturer is a hollow pipe used for ventilation.

How big is the market for fabric duct ventilation ducts?

When we want to enter an industry and decide to dedicate our light and heat, our calm choice is to analyze this market well.

How to ensure the construction quality of dust removal fabric duct ventilation duct?

How to ensure the construction quality of dust removal fabric duct ventilation duct? In order to promote the construction of dust-removing fabric duct ventilation ducts, we should formulate some drastic measures.

How does the ventilation duct manufacturer ensure the construction quality of the ventilation duct of the dust removal fabric duct?

How does the ventilation duct manufacturer ensure the construction quality of the ventilation duct for the dust removal fabric duct? 1.

What are the components of ventilation ducts?

There are common pipes everywhere in daily life, and it is not clear what to do.

Types of ventilation ducts

Ventilation ducts are metal or composite ducts for ventilation in industrial and civil buildings.