How to make thermocouples work more efficiently1

The correct installation of the terminals can make the thermocouple work more efficiently. Therefore, the surface analysis of the thermocouple should comply with the following requirements when installing. First, measure the size of the thermocouple and thermal resistance screws. According to the diameter of the thread seat, make a hole on the pipe to be measured. Welding of screw sockets. Insert the screw socket into the opened hole, weld the screw socket and the pipe to be measured, screw the thermocouple or thermal resistance into the welded screw socket, and install the thermocouple or thermal resistance according to the wiring diagram. The junction box is wired and connected with the corresponding display surface on the dial. Be careful not to touch the junction box with the pipe wall of the medium pipe under test, and ensure that the temperature in the junction box does not exceed the range of 0-100°C. The outlet hole of the junction box should be installed downward to prevent the short circuit of the terminal due to poor sealing, accumulation of water vapor and dust, etc. The orientation of the thermocouple terminal device should be considered for the convenience of maintenance and protection. Please save this link when reprinting!

An increasing dependence on the use of resistance temperature detector temperature sensor manufacturers has made numerous changes in the RTD supplier industry over the past decades.

We have professional skills and advanced facilities in temperature sensor and many years of experience in temperature sensor manufacturers industry. Choose our products at Jiutian Temperature Products, and you will get supreme buying experience in return.

A primary strategy is superior customer satisfaction. Shanghai Jiutian Automation Equipment Co., Ltd constantly analyzes market needs around the world to develop a full range of products for different use.