How to make thermocouples work more efficiently

The correct installation of the terminal can make the thermocouple work more efficiently. Therefore, the external analysis of the thermocouple should comply with the following requirements when installing. According to the diameter of the screw seat, make a hole in the pipe that needs to be measured. Welding of screw seat. Pierce the screw socket into the opened hole, weld the screw socket and the pipe to be measured, screw the thermocouple or thermal resistance into the welded screw socket, and connect the thermocouple or thermal resistance according to the wiring diagram. The junction box is connected to the wire and connected with the corresponding appearance on the dial. Pay attention that the junction box cannot touch the pipe wall of the tested medium pipe, and ensure that the temperature in the junction box does not exceed the 0-100°C scale. The outlet hole of the junction box should be installed downwards to prevent short-circuiting of the terminal due to poor sealing, water vapor and dust accumulation, etc. The orientation of the thermocouple terminal device should be considered for maintenance and protection.

RTD supplier temperature sensor is liked by everyone and is used in every household.

Shanghai Jiutian Automation Equipment Co., Ltd builds value for our investors through the strength of our customers’ satisfaction and by consistently producing superior operating results.

Simultaneously being able to offer not only the product but also the service, gives the customer a quality 'one-stop-shop' service.

Making a few technical tweaks to the way you structure and distribute resistance temperature detector could be the difference between an engaging, thought-provoking product and a perfunctory one.