How to select transducer, HuiXin thermal instrumentation tell you

A lot of friends will use transmitter, but if you want to go to buy, you should know how to buy? Buy the good or bad to late for us to use the transmitter to work can have a big impact. Do not know to have a friend can be said with all of us, if you don't know, let the HuiXin thermal meter to tell you.

when we are in the transmitter installation, we want to make his pressure sensitive axis vertical downward, if limited to the corresponding condition, then we have to adjust transmitter first and then is fixed. If residual stress cannot be released, so the sensor doesn't his zero. If the output of the transducer pressure did not change, but suddenly changed, then the pressure is back to not go to zero, may be caused by pressure sensor of the sealing ring.

we need to see if his power supply meets the requirements, in the case of power between the transmitter and have the wrong. If HuiXin thermal meter transmitter terminals or there is no voltage polarity meet the can let transmitter no signal output. When we choose the transmitter, we want to know the corresponding pressure measurement system, and then in the selection, ensure the system can carry on the work in the state of the two.

unless noted, original articles for HuiXin thermal instrument, welcome reproduced! Reprint please indicate the address, thank you. Article source: http://www. wuxiyibiao。 com