Inspcetion thermometer workplace and maintenance

Wcd magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer,

should make remote meter against a thermometer led tubes, and stainless steel hoop fixed ( Disable the iron) ； Far eastone meter zero with zero thermometer indicator at the same level; Junction box into the line hole laying, require good seal, so as to avoid the rain, moisture intrusion and make the remote transmission meter does not work, after the completion of the junction box in maintenance or commissioning should be covered in a timely manner.

inspcetion thermometer placed in a closed system, because media display part is completely isolated with the media, the inflammable, explosive medium in petrochemical plant and other industrial toxic, highly toxic medium level indicator to provide safe and reliable testing instrument.

inspcetion thermometer if it's unable to appear inversion phenomenon, is mainly due to the buoy are scum, buoy was stuck, not with the liquid level to fluctuate. Settle accounts of the use of such a thermometer must assure solution, first of all to ensure the clean inside the buoy, float the in good condition, if the thermometer is not working, the phenomenon of the magnetic flap doesn't exercise, you can open the buoy the drain valve, a bit the inside of the buoy solution, you can also use the magnet from the top to the bottom of the flap comprehensive adsorption.

the upper and lower flange installation process on the side of the container, according to the principle of float displaces the liquid volume weight equal. To float in medium was measured with permanent magnet steel and move up and down, along with the change of swimming level float within the magnetic drive display part, driven by float inside magnetic sensor part action signals, display instrument or control box installed in the control room, make the operation personnel to correctly grasp the change of liquid level.