Installation of ventilation ducts

The installation and production of ventilation ducts must first be adequately prepared. During the installation process, there are still some problems that need to be paid attention to. As follows: 1. Check whether the equipment meets the requirements and ensure that the exhaust surface is flat. There is an error to control it within 2 mm. Dust the duct again to make sure it looks clean. Leave the position and size of the hole. To assemble the air duct on the ground, it can be assembled in sections and fastened with flange bolts. The screw cap should face the same direction as the fabric air duct ventilation duct, put it above the bracket, and fix it manually and with the help of ropes to adjust the verticality of the air duct. 2. Fix it as required, and then fix the wires, etc. Both ends of the pipe section are rolled out from the drum and fastened with rivets, which can meet the requirements of ventilation installation. 3. The following inspections should be carried out before installation. After the inspection is passed, fill in the relevant acceptance documents before installation: the surface of the tuyere is flat, the deviation is

Shanghai Jiutian Automation Equipment Co., Ltd 's has been able to achieve excellent performance in an extremely competitive industry.

If you already use temperature sensor elsewhere or want the ability to offer restricted chat access to certain individuals, resistance temperature detector temperature sensor manufacturers offers you the most flexibility.

temperature sensor can be great additions to companies looking to improve the well-being of their employees, as well as increase the efficiency and productivity of their workers across the organization.