Instrument of bimetallic thermometer inspection process

According to the order, workshop do first three finished product table, first by qc inspection, the first after inspection through, according to the production plan for mass production of assembly workshop. Qc inspection was carried out on the double metal thermometer processes all different time periods, found that the problem is put forward in time to stop production and inform the production team leader, to the unqualified products timely identification and isolation. Ensure that the unqualified products not turn sequence, the unqualified parts assembly. Make a record nonconforming, determine the number of nonconforming product and note the production time and place the product batch production equipment. At the same time, the working procedure on the inspection process workers do artifacts. Debugging bimetallic thermometer key working procedure: the workshop according to the full scale test, select 3 points in range 0 25% 26% - 75% 76% - Any point of 100%, according to the work order accuracy detection. So sample, carries on the 5 point test. According to the sampling plan sampling, qc and fill in the inspection records. And the results compared with the specified requirements, determine the quality of each feature is meet the requirements of the regulations, so as to determine whether the products have been qualified. Sign of qualified, put in storage. Unqualified sign to distinguish, for sequestration, and inform related department to make corresponding disposal according to its degree. Sales representative customers will inspect the goods before shipment, take photos.