Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

JVTIA temperature controller wholesale for temperature measurement and control1

Inquiry

Overview

Quick Details

Place of Origin:: Shanghai, China

Brand Name:: Feilong

Model Number:: XMT-7100

Usage:: Industrial

Theory:: Temperature Controller

Accuracy:: 0.1%

Temperature range:: -9999-9999C

Precision:: 0.25%FS ± 0.1

Size:: 48*24*75(mm)

Power supply:: 24V DC

Delivery Detail:: temperature controller

Resolution:: 0.1°C for K, E, T, N, J, Cu50, Pt100

Approval:: CE/ ISO9100

Control method:: ON/OFF, PID

Response time:: less than 0.5s

Supply Ability

Supply Ability:: 10000 Unit/Units per Week

XMT 7100 Thermostat 110v Temperature Controller PID

Product Description

model	XMT-7100
type	temperature controller
temperature range	-9999-9999C
size	482475(mm)
Power supply	24V DC
graduation	B/S/K/N/E/J/T
material	PP
certificate	CE/ISO9001

Product Images Show

JVTIA temperature controller wholesale for temperature measurement and control1 2

1. digital pid temperature controller Product Highlights

Thermocouple: T, R, J, B, S, K, E, Wre3-Wre25.

Thermo Resistor: Pt100, Cu50.

1 Relay output, 1 SSR controlled output.

Time proportional PID controlled output to either Relay or SSR

Three built-in algorithms that fit most control objects and various applications.

Temperature can be set to display in either Fahrenheit or Celsius degrees.

2. digital pid temperature controller Specifications

Supply voltage: 12V AC or DC

Power consumption: < 2 Watts.

Sampling speed: 4/sec.

SSR activated voltage: open circuit: 10V; short circuit: 40mA.

Accuracy: 0.2% of full scale.

LED Display: Red, 0.28 inch

Out of range indication: EEEE.

Ambient temperature requirements: 0 to 50 C (32 to 122 F)

Humidity requirement: < 85% RH.

Relay Contact: 220VAC, 3A.

Controller dimensions: 48 x 24 x 75 (mm).

Opening for installation: 44 x 20 (mm)

3. Panel Illustration and Description

1 -- AL, Relay J1 Indicator.

2 -- Select next parameter / value increment.

3 -- Selection previous parameter / value decrement.

4 -- Digit select / Auto tuning.

5 -- Setting / Confirm.

6 -- Output, controlled output indicator. (AT) Blinking during auto-tuning process.

7 Temperature reading, degrees F or degrees C (as chosen)

4. Parameter Setting

a) Press (SET) to enter setting mode.

b) Press (>), (v) and/or (^) to enter and select parameters.

c) Press (SET) again to confirm entry or selection.

i.) To enter initialization parameter setting mode press (SET), then enter code 0089, press

(SET) again.

Table 1 - Initialization Parameters

Symbol	Description	Range	Default	Setting	Comment
Inty	Temperature Sensor Type	See table 2	Pt100
Outy	Method of controlled output	0,1,2	2		Note 1
CAty	PID algorithm	0,1,2	0		Note 2
PSb	Temperature Sensor Correction	-100 to +100 degrees F, C	0
rd	Heating = 0;Cooling = 1	0,1	0
CorF	Celsius =0;Fahrenheit = 1	0,1	0
End	Exit

Table 2 - Temperature Sensor T ype

Symbol	Description	Range	Comment
t	T Thermocouple	-270 ~ 400 C	Internal Resistant
r	R Thermocouple	-50 ~ 1768 C	Internal Resistant
J	J Thermocouple	-210 ~ 1200 C	Internal Resistant
WrE	WRe Thermocouple	0 ~ 2300 C	Internal Resistant
b	B Thermocouple	0 ~ 1820 C	Internal Resistant
S	S Thermocouple	-50 ~ 1768 C	Internal Resistant
K	K Thermocouple	-270 ~ 1372 C	Internal Resistant
E	E Thermocouple	-270 ~ 1000 C	Internal Resistant
P10.0	P100 Thermo Resistor	-2.000 ~ 6.000 C	onstant Output
P100	Pt100 Thermo Resistor	-200 ~ 600 C	onstant Output
Cu50	Cu50 Thermo Resistor	-500 ~ 1500 C	onstant Output

Note 1:

0: Relay J1 Alarm output; SSR Disabled, normally used for upper lower limit alarm trigger control.

1: Relay J1 PID controlled output: SSR Disabled. Contact controlled output.

2: Relay J1 as alarm output; SSR PID controlled 12 Volt output. No Contact controlled output.

Note 2:

This controller has 3 types of auto-tuning control methods already built-in:

0: Universal PID control suitable for increase/decrease fast speed of change of temperature

application.

1: Gradual change PID control is suitable for applications that require steady change of

temperature and speed of temperature change is not critical.

2: Fuzzy logic control suitable for system with oscillation and sensing signal delay.

FAQ

1. Payment ways?

T/T, PAYPAL, WESTERN UNION.

2. When will you arrange the production?
In 12 hours since we get your payment.

3. What is your main products?
Thermocouple, PT100 sensor, termperture controller, infared thermometer and so on.

4. Product certifications?
ISO9001, CE, ROHS, FDA, SGS and other certificates.

5. What kind of informations shall I give you regarding the shipping?
Company name, Recipients, Correct Address, telephone, zip code.

6. What is your warranty ?
For most of our products, the warranty will be 12 months.

7. When will I get a solution for defective products?
Within 48 hours (on working days )

8. What is your shipping way?
DHL, FEDEX, UPS, TNT, EMS, CHINA POST AIR, SEA FREIGHT and AIR FREIGHT!

9. What is your shipping time?
For General Orders, the shipping time will be 5 workdays.

Shanghai Jiutian Automation Equipment Co., Ltd has a specialized R&D team, whose specialized members have over- ten- year experience in thermocouple manufacturers field. It is water-resistant and rust-resistant. Shanghai Jiutian Automation Equipment Co., Ltd keeps consistency concurrent with the latest trends in the market. It is water-resistant and rust-resistant.

we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.