KH - HZD vibration transducer parameters in detail

KH - HZD integration vibration transducer is to integrate the traditional vibration sensor, precision measuring circuit together, realized the high precision vibration measuring system, the product can be directly connected with PLC, DCS system to use. Integrated vibration transducer is mainly installed on all kinds of rotating machinery bearing cover ( Such as steam turbine, compressor, motor, fan and water pump, etc. ) , measured vibration velocity and vibration amplitude. It is produced by the motor coil cutting lines of magnetic force output signal of the transmitter, so that the work only need to supply DC24V power supply, installation, easy maintenance, etc. Has be used in power plants, cement plants, machinery, air blower factory, coal mine machinery. Is mainly used to diagnose the faults of rotating machinery in advance or laboratory to improve products provide the basis, for enterprises to advance ready to maintenance, reduce the occurrence of accidents, improve the work efficiency.

a, main technical index

v acuity: 20 mv/mm/s plus or minus 5%, 30 mv/mm/s plus or minus 5%, 50 mv/mm/s plus or minus 5%

v frequency response: 5 ~ 1000 hz, refers to the frequency range of being measured,

v natural frequencies: 10 - 300 hz, referring to their vibration frequency range

v measurement range: 1, 0 ~ 10 mm/s, 0 ~ 20 mm/s, 0 ~ 30. 0mm/S、0～40. 0 mm/S, 0 ~ 50 mm/S

2, 0 ~ 100 um, 0 ~ 200 um, 0 ~ 300 um um, 0, 0 to 400 ~ 500 um

v signal output: standard 4 ~ 20 ma current ( If users are not stated, the factory will be subject to two wire system)

v output impedance: 500 or less Ω

v electricity source, DC24V

v maximum acceleration: 10 g

v installation: vertical or horizontal installation on the measured vibration source, welding or screw or suction cups

v installation thread: B: M8 x 1. 25 thread, F type: M20 x 1. 5 welding nut

v using the environment: - temperature 35 ℃ ~ 55 ℃, relative humidity 90% or less

v shape dimension: B: the & # 216; 45 * 80 mm, F type: the & # 216; 72 x 110 mm

v heavy volume: B: about 500 g, F type: about 1200 g