Magnetic flap side mounted the skills of the thermometer

M1f magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

side mounted it has a magnetic flap thermometer accommodate floating ball cavity or we call it as the main body tube shell, it through the flange or other interfaces form a communicating vessels and containers; It cavity in the body of liquid level and liquid level of container is the same height, so the cavity in the body to float the club lift with lifting container level.

when manufacturing floating ball in the floating ball into a liquid and the part of the border installed magnets, it has to do with floating ball with the liquid level fluctuation, its magnetic through shell is passed to the column display, promote magnetic double column flip 180 & deg; ； Due to the magnetic double column is a red and white two and a half cylindrical composite cylinder, so turn over 180 & deg; After facing double column displays will change the color of the outside ( Liquid level above the following red, white) Two color border, that is on the surface of the liquid level.

type control is on the basis of the magnetic flap thermometer increases the magnetic control switch, at the same time in the monitoring level of magnetic control switch signal can be used to control or alarm level; Far eastone type is on the basis of the magnetic flap thermometer increased by 4 ~ 20 ma analog sensors, at the same time in the field monitoring level of the change of liquid level through analog sensors, cables and instruments to the control room, to realize remote monitoring and control.

installation optional side and top, bottom sealing of ontology. According to the need to install drain valve. In place of the flange can accept custom, indicator is composed of magnetic tablet, when body inner magnetic float level increase in color piece, can display liquid level height. Can also be used on the pipe body with magnetic switch or remote transmitter, or analog signal output switch signal. Side mounted level between the upper and lower points of the measured container liquid tube and a globe valve to open or assembly thermometer, on the other hand, bring convenience for the maintenance level. In the upper and lower cut-off valve is closed, open the thermometer at the bottom of the drain flange or drain screw, injected water can clean the body of the thermometer.

above all for thermometer factory carefully arrange, only supplies the reference concrete into web:

http://www. 517席。 com/fanban/105. 超文本标记语言