loading

Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

Magnetic flap thermometer common problems and faults and matters needing attention

Magnetic flap thermometer common problems and faults and matters needing attention for you to solve the problem of the liquid level of the general common and fault. On-site calibration float up and down occasionally found in flexible enough. This is mostly due to improper installation, magnetic flap thermometer at the moment to pay attention to the center of the upper and lower flange is in a line, whether with horizontal vertical. In general, and horizontal Angle had better not less than 87 degrees, if the deviation is bigger, may impact the float move smoothly. Magnetic flap J6x | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

the thermometer calibration is normal, after putting-in-service proactively find float at a particular location in a period of time & other Absorb & throughout; Phenomenon. The thermometer mainly through the steel platform installation, with steel plate too close. Therefore, through the steel platform installation requires special attention to the thermometer pipe wall and cutting line spacing. Shanghai YunOu, according to the experience of the field use, the distance here as early as 100 ㎜ can guarantee the influence of magnetic float. Magnetic flap J6x | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

when a thermometer putting-in-service proactively on the spot, to pay special attention to should be opened the upper gate, after open the lower gate valve. Glass thermometer which is due to the bottom of the pipe is equipped with protection thermometer float the thrust of spring, otherwise, the role of big differential pressure may result in the thermometer can't use through the float. If the scene caused by transportation or other reasons instructions with sealed glass tube rupture, usable glass tube replaced. Magnetic flap | | glass thermometer thermometer J6x floating ball | | glass thermometer thermometer two-color thermometer

GET IN TOUCH WITH Us
recommended articles
NEWS
At present, more and more customers on the market are just beginning to attach great importance to the hidden dangers of the application of air disc machines and equipment.
Ventilation duct manufacturers talk about three welding methods for fabric ducts: Method 1: Manual welding.
It should be erected by the scaffolder according to the special safety construction organization design (construction plan) or safety technical measures.
Compliance Standards and Common Problems in Ventilation Duct Equipment Many bosses generally ignore the smoke exhaust system and natural ventilation planning of the restaurant kitchen when they open a new restaurant, which eventually leads to the closure of the hotel for renovation, renovation or sale of serious losses.
Ventilation pipe ventilation pipe manufacturer is a hollow pipe used for ventilation.
When we want to enter an industry and decide to dedicate our light and heat, our calm choice is to analyze this market well.
How to ensure the construction quality of dust removal fabric duct ventilation duct? In order to promote the construction of dust-removing fabric duct ventilation ducts, we should formulate some drastic measures.
How does the ventilation duct manufacturer ensure the construction quality of the ventilation duct for the dust removal fabric duct? 1.
There are common pipes everywhere in daily life, and it is not clear what to do.
Ventilation ducts are metal or composite ducts for ventilation in industrial and civil buildings.
no data

CONTACT DETAILS

Phone: +86 13816377866
Email: jimmy011@126.com
Add:NO999, Sunqiao RD, Pudong area, Shanghai, China
 

CONTACT US FOR FREE SAMPLE !

For more products related question ,Welcome to inquiry us .

Copyright © 2019 Shanghai Jiutian Automation Equipment Co., Ltd. | Sitemap
Customer service
detect