Magnetic flap thermometer four fluorine lining

Jiangsu factory specializing in the production of stainless steel lining magnetic flap thermometer thermometer is made of stainless steel lining ontology polypropylene ( PP) And polytetrafluoroethylene ( PTFE） Process, has high structural strength and corrosion resistance, can be applied to acid such as hydrochloric acid liquid, alkali and organic solvents. But is not suitable for concentrated nitric acid, chlorinated solvents, aromatic and aliphatic measurement of liquid medium. 1. Side mounted stainless steel lined with magnetic flap with stainless steel body thermometer four fluorine lined with ptfe ( PTFE） And stainless steel inner liner polypropylene ( PP) A measure of the two kinds, suitable for corrosive medium. 2. 。 Lining side mounted type magnetic flap thermometer ( PTFE） Suitable for corrosive medium and high working temperature and liquid level measurement, using advanced new technology of stainless steel lining ptfe stretch flanging, structure and reliable, long life, strong corrosive medium such as hydrofluoric acid is the best choice for level measurement. 3. Lining side mounted type magnetic flap thermometer ( PP) Applicable to hydrochloric acid and dilute sulphuric acid, inorganic kind of corrosive liquid measurement, because of imported high strength is close to metal, especially the PPR unique heat preservation, this product is suitable for outdoor water tank level measurement, internal will not freeze in winter. But not as PTFE lining type heat resistance and compression performance is good, the temperature and pressure is lower to choose the high cost performance products. AOQ magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

the performance of the magnetic flap lined thermometer four fluorine can also highlight its advantages: is outside the body of the electrical installation in the base type mixing heat source, asbestos insulation layer, keep the temperature of the liquid in the main body so that it can make the liquid flow normally around 75 ℃, the lateral made from 304 stainless steel plate appearance. 1. Is made of save words design brake characteristics and performance requirements: for product manufacturing process, its performance is various, for the general product manufacturing, its performance including productivity, production capacity, in the number of products, production of balance, equipment utilization, reliability, etc. Digital technology application in the manufacturing process will not only satisfy the requirements of the product's manufacturing system, also to comply with the principle of digital manufacturing technology. Users can according to the requirements of the project, cooperate with remote transmitter use, can be realized on the digital display, as well as the standard of 4 ~ 20 ma output far eastone electrical signals, to match the recording instrument, or the needs of the industrial process control. Can also be used with magnetic control switch or close to switch, etc, the liquid level monitoring alarm and control into the liquid equipment. Magnetic flap lined thermometer four fluorine is an extension of the magnetic flap thermometer process, intelligent level, integration level of products, and human, technology, which integrates new product development. Magnetic flap | | glass thermometer thermometer AOQ floating ball | | glass thermometer thermometer two-color thermometer