Magnetic flap thermometer used in problem solving

1 cy magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

the magnetic flap thermometer thermometer factory is our factory introduction, absorption of similar foreign products, and absorption, digestion, improve the product. Thermometer in use process, for some reason in indicator within a certain period of red, white and disorderly phenomena, available correction magnets outside indicator shield to straighten out the frame color.

1 cy magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

the method is: will the magnets from the top of the display slowly to fall to the gas-liquid separation, make the aneroid all part of a display is white; Then magnetic steel upward from the bottom suspended slowly slide to the liquid gas separation, liquid are all part of a display for red, gas liquid color display is converted to normal. After years of use, especially in high temperature condition after long-term use, such as found that magnetic flap tracking is not flexible, should first check whether float magnets inside the demagnetization, if already demagnetization, float should be replaced. Float into the measuring tube, to make the float marked arrow up ( That is magnetic steel end up) And don't put wrong. The magnets in the upper limit of the sensor location, the top of dry reed pipe, adjust & other; Range & throughout; Potentiometer, make the output of 20 ma. Repeated several times, until satisfied. Magnetic flap thermometer measurement without blind area, whole process shows striking, intuitive readings, wide measuring range, especially the instructions part, because no direct contact with the liquid medium, so the high temperature and high pressure with high degrees, poisonous and harmful, strong corrosive medium, more show its superiority. As a result, it than the traditional glass tube, plate thermometer.