Prefabricated thermocouple used in glass industry

Used in the glass industry of prefabricated thermocouple glass for more than 20 years, three chang instrument has been producing temperature solution for glass industry. Our products are constantly updated, in order to meet the challenge of glass manufacturing and production technology of changing. We focus on customized design and engineering solutions. Thermocouple

3 prefabricated container before furnace, the viscosity of the glass has a great influence on the flow velocity and material weight drops. On the plate before furnace installation of prefabricated thermocouple can accurately monitor and control the glass temperature. Because of the viscosity depends on the temperature, the resulting glass flow evenly.

for glass manufacturers, the accurate control has many benefits:

the best weight of each container.

reduce wear tank, increase fuel tank life.

by higher container each batch production to overall cost savings.

molten glass is a kind of harsh environment, any in the prefabricated thermocouples must be able to withstand harsh environment. The third level components from erosion properties of glass by ODS outer sheath protection & reg; Platinum and platinum/rhodium with interval, get the top, middle and bottom temperature readings of the three points. This allows precise control heating and cooling, in order to provide uniform glass flow.

fully welded design

ceramic design along the feeder arrangement of three layers, so as to adapt to the complexity of control system. Each level design for individual feeding way. Through each component of the overall cost to optimize life expectancy.

in the early period of the typical arrangement

3 can be obtained through the following calibration:

R ( Pt / Pt 13% rh)

S ( Pt / Pt 10% rh)

B ( Pt6%Rh / Pt30%Rh)

3 chang instrument using fiber original & reg; Platinum two type R and S three levels, increased the strength of RMB, and improving the lives of the whole assembly.

single point glass fabricated thermocouple

some applications need only single point measurement. Can use the same as the three levels of design style, but only a prefabricated thermocouple connections. Is at the bottom of the connection point can, or some other high.