Pt100 integration display thermocouple sensor

Display thermocouple sensor pt100 integration profile

pt100 integration shows the perfect combination of thermocouple sensor and transmitter, the - in very simple way 200 ~ + 1600 ℃ temperature in the range of the signal is converted to a two wire 4 ~ 20 ma DC electrical signal transmission to display, regulator, recorder, DCS, etc. , it can realize accurate measurement and control of temperature. Integrated temperature transmitter is the modern industrial field, the update products, scientific research institutes temperature measurement and control is necessary for collecting and distributing system, digital bus system.

integration display thermocouple sensor technology index

accuracy of 0. 2%F. 年代0。 5%F. S

entered thermocouple: B, S, T, K, J

thermal resistance: Pt100, Pt10, Cu100, Cu50

lose two wire 4 - 20 ma DC

- use temperature 25 - 85 ℃ ( 0 - integrated LCD header 60 ℃ )

temperature 0 or less. 05% ℃

5 - wet degrees 95% RH

display precision digital: 0. Level 5 pointer: 2. Level 0

load capacity & lt; 600Ω Rated load 250 Ω)

appearance size 44 by 18

integration shows characteristics of thermocouple sensor

subminiature ( Module phi 44 by 18) Integration, strong commonality

two wire 4 ~ 20 ma DC output. Long transmission distance, strong anti-jamming capability.

the cold end, automatic temperature drift, nonlinear compensation.

high measuring accuracy, good stability for a long time.

the temperature inside the module USES epoxy pouring process, using suitable for all kinds of bad and dangerous places.

integration design, simple and reasonable structure, can be directly replace ordinary prefabricated thermocouple, heat resistance.

mechanical protection IP65.

adopted thermocouple temperature change, can use free compensation wire, reduce the cost of the

indicator for LCD, digital tube, Pointers, and other convenient for timely monitoring.

the scene environment temperature & gt; 70 ℃, the transmitter and the display instrument can be used to separate, Isolation) Type of installation