loading

Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

Radar level meter note

Radar level meter high temperature and high pressure, corrosion resistance, such as mixing complex working conditions. Can be used as asphalt, acid and alkali tanks, reaction kettle mainly in chemical, petrochemical and other industries; The blast furnace burden material level, the high temperature melt metal liquid level. This kind of working condition of the material being tested at higher temperature, due to the thermal radiation, material level meter installed temperature is very high, so usually adopt with curved extension tube beep antenna, electronic parts away from thermal radiation area, stainless steel horn antenna and the higher temperature. The propagation and reflection and radar is not affected by temperature. Typical applications have a blast furnace burden material level measurement, molten steel level measurement, melted aluminum liquid level measurement, etc. Large storage tank liquid level precision measurement. Crude oil, product oil, liquefied petroleum gas, chemical liquid level measurement, can this Ann or explosion. The process level instrument measuring accuracy can reach & plusmn; 3 mm, level measurement instrument can reach & plusmn; 1mm。 In recent years, radar level meter will gradually become the main instrument in the field. Magnetic flap e6Y | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

in the selection, radar thermometer should give full consideration to the specific situation of the material being tested. According to the process of pressure and temperature to choose corresponding connecting flange: according to the range and medium dielectric constant, shaking or vortex and bubble, etc. , determine the antenna size, the larger the range, the lower the dielectric constant, the antenna size should be bigger; Such as measurement occasions for the corrosive, should choose the surface coated PTFE rod antenna measurement system; Such as measurement occasions for high temperature ( More than 200 ℃) , high pressure, should choose band antenna extension tube of high temperature and high pressure; If medium easy condensation can be used with shielding tube rod antenna system; For food, health industry, and health products to choose from. E6Y magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

in the center of the transmitting antenna be vertical axis and the material surface under test, well at least ensure the tank wall spacing of 30 cm. Antenna syndromes beep front end should be stretched into the container inside, in order to reduce due to take over and equipment installed between meet the emission energy loss caused by the welding. Avoid installed in the center of the trough, because that would make false echo enhancement. Do not install in the top of the feeding mouth, mainly to prevent loading amplitude than the measured liquid level may be produced when the shooting of effective false echo echo is much bigger. When measuring with a mix of container liquid level, should avoid as far as possible when the blender mixing vortex formed by the district, to as much as possible to eliminate irregular scattering attenuation caused by the liquid in the face of the microwave signal. When tank manufacturing material dielectric constant is less than 7, such as fiber reinforced glass, such as polyethylene, polypropylene, or lead-free glass, Ken wall thickness is moderate, can be installed on the outside of the tank. If medium reservoir of spherical container, should be guided wave tube or by-pass pipe installation, so that we can eliminate multiple echo interference brought by the shape of container. Improve the signal-to-noise ratio. In measuring dielectric constant small medium ( Such as liquefied petroleum gas, gasoline, diesel oil, transformer oil, etc. ) Because these medium can produce relatively large of microwave attenuation, to improve the reflection energy to ensure the accuracy of measurement, also should be installed with guided wave tube. Magnetic flap e6Y | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

e6Y magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

GET IN TOUCH WITH Us
recommended articles
NEWS
At present, more and more customers on the market are just beginning to attach great importance to the hidden dangers of the application of air disc machines and equipment.
Ventilation duct manufacturers talk about three welding methods for fabric ducts: Method 1: Manual welding.
It should be erected by the scaffolder according to the special safety construction organization design (construction plan) or safety technical measures.
Compliance Standards and Common Problems in Ventilation Duct Equipment Many bosses generally ignore the smoke exhaust system and natural ventilation planning of the restaurant kitchen when they open a new restaurant, which eventually leads to the closure of the hotel for renovation, renovation or sale of serious losses.
Ventilation pipe ventilation pipe manufacturer is a hollow pipe used for ventilation.
When we want to enter an industry and decide to dedicate our light and heat, our calm choice is to analyze this market well.
How to ensure the construction quality of dust removal fabric duct ventilation duct? In order to promote the construction of dust-removing fabric duct ventilation ducts, we should formulate some drastic measures.
How does the ventilation duct manufacturer ensure the construction quality of the ventilation duct for the dust removal fabric duct? 1.
There are common pipes everywhere in daily life, and it is not clear what to do.
Ventilation ducts are metal or composite ducts for ventilation in industrial and civil buildings.
no data

CONTACT DETAILS

Phone: +86 13816377866
Email: jimmy011@126.com
Add:NO999, Sunqiao RD, Pudong area, Shanghai, China
 

CONTACT US FOR FREE SAMPLE !

For more products related question ,Welcome to inquiry us .

Copyright © 2019 Shanghai Jiutian Automation Equipment Co., Ltd. | Sitemap
Customer service
detect