Seismic pressure gauge how to install

Seismic pressure gauge is also called the oil filled pressure gauge, seismic pressure gauge for severe vibration environment, can be tolerated, impact and sudden unloading in the pulse of the medium, has been widely used in mechanical oil, chemical, metallurgy, mining, power production, measurement of copper and copper alloy non-corrosive medium pressure. Seismic pressure gauge how to install? The following instruments to share for you. Should be used when (1) meter must be installed vertically: 17 mm wrench to tighten, should not strong torsional case; Transportation should avoid collision. Instrument to use appropriate at ambient temperature for - [2] 25~55℃。 (3) the use of the work environment vibration frequency & lt; 25 hz, the amplitude is not more than 1 mm. 吗? (4) used by environmental temperature, indicating value of the instrument is not back to zero or appear, indicating error can cut open upper case sealing rubber plug, make the instrument lumen and atmosphere are interlinked. 5] pressure gauge installation location should conform to the requirements of installation state, dial, generally should not be placed, the discretion of the installation position should facilitate staff observations. [6], seismic pressure gauge is installed in the case of without pressure, observe whether the pointer in zero or close to the nail plate check, or unfavorable use. If installed against the wall, should choose to have the edge of the pressure gauge; Directly installed on the pipeline, should choose without the edge of the pressure gauge; For reasons of pressure management position and convenient for observation, should choose the size of the casing diameter. The characteristics of the seismic pressure gauge with good earthquake resistance.