Temperature automatic control system is introduced1

Temperature automatic control system USES the

record temperature and equipment operation data, save manpower, save electricity, easy to use.

temperature automatic control system shows that the

now using small units of fresh, use single table for more control, single table control is simpler, but single table control has limitations, low degree of intelligence, management is very difficult to achieve effective management. In order to improve the management level of fresh refrigeration equipment, can use distributed control scheme: computer + management software, the way to control the extension.

computer installed in the office, managers can be convenient to check the temperature data on the computer, and to adjust temperature control;

extension installed near the control cabinet, measure the rolls of multipoint temperature of compressor (and Or solenoid valve) , fan, defrosting control. Installed near the control cabinet, can access three temperature probe, respectively control the operation of the compressor, blower, defrosting, intelligent degree is very high.

the extension to the computer through the RS485 bus connection.

computer software real-time display and record the temperature data and running state of each extension can issue commands at the same time, control the operation of the engine.

because extension is not dependent on computer run independently, and have high reliability. Computer to monitor the running status of the extension, to further guarantee the reliability of the refrigeration system operation, to ensure timely find problems and timely processing.