The installation of the bimetallic thermometer female and male

Bimetallic thermometer is the use of two different expansion coefficient of metal composition, temperature sensing element is a bimetallic strip, so also known as the bimetallic thermometer. Now society is more and more industrialized, bimetallic thermometer is widely applied in the industrial, so in the industry, now the bimetallic thermometer is most often present in the line, the staff by means of the bimetallic thermometer installed in the pipeline temperature control, in order to test equipment usage. According to the pipe thread interface, select supporting the installation of the bimetallic thermometer screw tooth. （ Contains the female and male, that is, according to the thread in bimetal tube wall after medial or lateral) 。 In general, when the pipe joint on the original equipment is the female adapter, in order to match with the original joint, then you should use nipple bimetallic thermometer. Finally tell you, for the installation of the bimetallic thermometer when choose to install the measurement position need to pay special attention to, had better not choose in a corner of the valve, elbow or equipment, to guarantee the measurement end of the thermometer and has sufficient heat exchange between the measured medium.