loading

Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

The measurement and application of liquid level meter1

Level gauge measurement and application - — Liquid level meter in the liquid storage container or industrial production equipment, powder, granular solids or mutual miscibility between two liquids due to density surface formation interface position, according to the specific USES are divided into liquid level, material level, interface sensor and transmitter.

level measurement has an important position in the industrial automation system, is an important parameter of ensure the continuity and equipment safety. For example in the case of continuous production, to maintain certain devices ( Such as steam boiler, evaporator, etc. ) In the stability of liquid level height, to guarantee the safety of production and equipment is essential. Such as severe fluctuation of water level of large boiler, at once the water a few called bell, there may be danger of dry up. And as in the production of synthetic ammonia copper washing tower bottom liquid level control, such as liquid level is too high, refined with liquid gas, cause catalyst poisoning in synthetic tower; Instead, such as liquid level is too low, will lose the liquid seal, high pressure gas into regeneration system, cause serious accidents.

although liquid level measuring instrument selection and use is closely related with the production process, but general speaking, the purpose of the liquid level meter mainly has the following kinds:

( 1) Correctly measured the volume or the weight of container storage material, namely the purpose of level measurement is used for measurement and economic accounting.

  ( 2) Monitor container liquid level, the level allows the upper and lower limit alarm, which need not continuous testing and output level of specific values, as long as the switch signal output level changes.

  ( 3) Continuously monitor the production and adjustment, and liquid level to keep the height of the required, which requires continuous output level of the liquid level gauge instantaneous signal values.

GET IN TOUCH WITH Us
recommended articles
NEWS
At present, more and more customers on the market are just beginning to attach great importance to the hidden dangers of the application of air disc machines and equipment.
Ventilation duct manufacturers talk about three welding methods for fabric ducts: Method 1: Manual welding.
It should be erected by the scaffolder according to the special safety construction organization design (construction plan) or safety technical measures.
Compliance Standards and Common Problems in Ventilation Duct Equipment Many bosses generally ignore the smoke exhaust system and natural ventilation planning of the restaurant kitchen when they open a new restaurant, which eventually leads to the closure of the hotel for renovation, renovation or sale of serious losses.
Ventilation pipe ventilation pipe manufacturer is a hollow pipe used for ventilation.
When we want to enter an industry and decide to dedicate our light and heat, our calm choice is to analyze this market well.
How to ensure the construction quality of dust removal fabric duct ventilation duct? In order to promote the construction of dust-removing fabric duct ventilation ducts, we should formulate some drastic measures.
How does the ventilation duct manufacturer ensure the construction quality of the ventilation duct for the dust removal fabric duct? 1.
There are common pipes everywhere in daily life, and it is not clear what to do.
Ventilation ducts are metal or composite ducts for ventilation in industrial and civil buildings.
no data

CONTACT DETAILS

Phone: +86 13816377866
Email: jimmy011@126.com
Add:NO999, Sunqiao RD, Pudong area, Shanghai, China
 

CONTACT US FOR FREE SAMPLE !

For more products related question ,Welcome to inquiry us .

Copyright © 2019 Shanghai Jiutian Automation Equipment Co., Ltd. | Sitemap
Customer service
detect