loading

Expert Thermocouple & RTD &Temperature Sensor Manufacturer.

The performance of the single head thermocouple conditions

1 heating time

single head thermocouple under the test voltage, the component temperature from ambient temperature to test time should be no greater than 15 min

2 rated power deviation

under the condition of fully fever, rated power of the extent of the deviation should be no more than the following provisions;

element to the rated power is less than or equal to 100 w as: plus or minus 10%.

element to the rated power is greater than 100 w + 5% ~ - Larger value of 10%, or 10 w, take both.

3 leak current & lt; /DIV>

cold leak current after test and water pressure and seal leakage current shall not exceed 0. 5 ma

under the working temperature of thermal state in the leakage current shall not exceed formula calculated value, but * no more than 5 ma

I = 1/6 ( tT×0。 00001).

I— Hot leak current mA

t - Fever mm length

T - Working temperature ℃

multiple components in series to the power supply, it should be a set of components as a whole for leakage current test.

4 insulation resistance

factory inspection cold insulation resistance shall be not less than 50 M Ω

after sealing test, after long-term storage or use of the insulation resistance should be needless and M Ω

under the working temperature of hot insulation resistance shall be not less than calculated value in the formula, but small * should not be less than 1 M Ω

R =' 10 - 0. 015吨) / t”×0。 001

R— Hot insulation resistance M Ω

t - Fever mm length

T - Working temperature ℃

5 insulating compression strength

element should be keep under specified test conditions and test voltage for 1 min, and no flashover and breakdown phenomenon

6 on the ability of power through the

element should be able to experience under the test conditions prescribed by the power test for 2000 times, without damage to the

7 overload capacity

element under the specified test conditions and input power should be 30 times cycle under overload test, without damage to the

8 heat resistance

element under the specified test conditions and test voltage shall be under a 1000 - cycle heat resistance test, without damage to the

dear customer:

a: hello, our company is a strong technical force of the development of high-quality groups, to provide customers with high-quality products, complete solution, and the best technical services company. The main products are platinum rhodium thermocouple, B type thermocouple, u-shaped thermocouples, etc. This enterprise uphold sincerity, with the purpose of the implementation of quality and with enterprising societe generale, with a firmer step climb the new peak unceasingly, contribute to national automation industry, welcome new and old customers to rest assured the choose and buy the desired products. We will serve you wholeheartedly!

GET IN TOUCH WITH Us
recommended articles
NEWS
At present, more and more customers on the market are just beginning to attach great importance to the hidden dangers of the application of air disc machines and equipment.
Ventilation duct manufacturers talk about three welding methods for fabric ducts: Method 1: Manual welding.
It should be erected by the scaffolder according to the special safety construction organization design (construction plan) or safety technical measures.
Compliance Standards and Common Problems in Ventilation Duct Equipment Many bosses generally ignore the smoke exhaust system and natural ventilation planning of the restaurant kitchen when they open a new restaurant, which eventually leads to the closure of the hotel for renovation, renovation or sale of serious losses.
Ventilation pipe ventilation pipe manufacturer is a hollow pipe used for ventilation.
When we want to enter an industry and decide to dedicate our light and heat, our calm choice is to analyze this market well.
How to ensure the construction quality of dust removal fabric duct ventilation duct? In order to promote the construction of dust-removing fabric duct ventilation ducts, we should formulate some drastic measures.
How does the ventilation duct manufacturer ensure the construction quality of the ventilation duct for the dust removal fabric duct? 1.
There are common pipes everywhere in daily life, and it is not clear what to do.
Ventilation ducts are metal or composite ducts for ventilation in industrial and civil buildings.
no data

CONTACT DETAILS

Phone: +86 13816377866
Email: jimmy011@126.com
Add:NO999, Sunqiao RD, Pudong area, Shanghai, China
 

CONTACT US FOR FREE SAMPLE !

For more products related question ,Welcome to inquiry us .

Copyright © 2019 Shanghai Jiutian Automation Equipment Co., Ltd. | Sitemap
Customer service
detect