The reason of false level traced back inspcetion thermometer

HA3 magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer

two-color thermometer thermometer factory according to customer reflect, according to the principle of analysis it is concluded that the following causes of float magnetic thermometer false level:

1. Because of the other devices to work together, the inspcetion thermometer signal circuit fault.

2。 Because of manufacturer is telephone installation instruction, from operators waveguide installation is not correct, to the internal wire waveguide fault, such as loose, bad sealing water rust, etc. , cause the distortion of signal transmission.

3。 Too much interference signal, circuit is false signal, not the actual measuring signal;

thermometer factory factory tip: also called float inspcetion thermometer thermometer. Structure, on the basis of the principle of by-pass pipe leading tube liquid level and liquid level height consistent within the container equipment, according to the Archimedes theorem, the magnetic float liquid level in the buoyancy and gravity balance, float to float on liquid surface, when the measured liquid level fluctuation of the container, the thermometer float in the main tube also subsequently lifting, float in the permanent magnets by magnetic coupling driving indicator in the red and white double column turn 180 degrees, when the liquid level rises, double column from white to red, the liquid level falls, double column from red to white, indicator of red and white containers within the medium level the actual height of the world and showing the phenomenon of liquid level and inspcetion magnetic thermometer is one of the most widely used thermometer, its operation is simple, use reliable by the favour of people, so about the phenomenon of false level can completely in accordance with the above information. HA3 magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer