The use of anti-corrosion bimetallic thermometer matters needing attention

Series of anti-corrosion bimetallic thermometer is used in industry using advanced processing technology, the ptfe sintering in metal surface temperature protection tube and the connection device, to ensure that the sensor does not corrode with medium contact parts. Can be widely used in all kinds of chemical enterprise, the measurement of any kind, with wider range of concentration of acid, alkali and strong oxidizing process of medium temperature.

the anti-corrosion bimetallic thermometer protecting tube outer lining ptfe package layer is thinner, vulnerable to sharp material prick, in unpacking, be careful the installation process, so as to avoid puncturing touch bad. Acceptance inspection: ptfe has strict protection tube before they leave the factory inspection, but to prevent devanning, transportation damage, before using should be appearance inspection, flaw detection, and USES the edm micro-hole 12 kv voltage, frequency of 1. 6 * 106 hz don't breakdown; Ptfe fixed screw, working pressure of 0. 6 mpa, appropriate force when installation, elastic moderate, so as not to twist the bad ptfe fixed screw thread.

the anti-corrosion bimetallic thermometer in the process of transportation, installation and use, should avoid collision sheath maerial of temperature. In order to ensure the precision of measurement, anticorrosive bimetallic thermometer shall not be inverted with violent vibration, cannot exceed the measurement range. Sheath maerial of insertion of the measured medium length should be not less than two-thirds of the length of the sheath maerial, banned twist instrument shell during installation. Don't make the anticorrosive bimetallic thermometer protecting tube bending variant and the table when the spanner is used, the bimetallic thermometer in under the condition of normal use shall be regular inspection. Is every six months.