Thermocouple and explosion-proof platinum thermocouple what is the difference between the two temperature gauges _ instrument

Single thermocouple profile of explosion-proof, explosion-proof platinum platinum thermocouple using clearance flame-proof principles, design has enough strength of the junction box, and other components, all can produce spark, arc and dangerous temperature zero parts are sealed in the box cavity, when the explosion cavity, can remove from heat and cooling by joint clearance, made after the explosion flame temperature and not reach outside the cavity, thereby for temperature measurement. Through the compensating conductor and display meter, recording meter, electronic computer and other systems. Directly measuring the production site exist hydrocarbon explosion of 0 ~ 500 ℃ range within the liquid, steam and gas medium and solid surface temperature. Two, explosion-proof platinum thermocouple characteristic new explosion-proof procedures according to international IEC standard GB3836 design; USES two cavity flame-proof structure, change the temperature measuring device is simple, the use of safe and reliable explosion-proof marks EXd Ⅱ CT6, suitable for Ⅱ C below level, ignition temperature above T6, with explosive gas temperature measurement. Ordinary thermocouples from the thermocouple temperature measurement principle, the measured the change in temperature is directly measured by thermocouple resistance change, therefore, the wires of a thermocouple body such as a variety of wire resistance change will affect temperature measurement. Thermocouple is by thermal components ( The resistor body) , wire, insulation materials, stainless steel casing combination solid body, its diameter is generally from 2 to 8 mm, achieve more xiaoke phi is 0. 25mm。 Compared with conventional type thermocouple, it has the following advantages: (1) small volume, no internal air gap, thermal inertia, the measured value after small; (2) good mechanical properties, resistance to vibration and shock. (3) can bend, easy to install; 4. Long service life. Thermocouple temperature measuring instrument is commonly used in temperature measuring element, is made up of two different components of the conductor when two ends synthesis loop, when the two junction thermocouple temperature is not at the same time, will produce thermal current in the circuit. If the work end of the thermocouple with the reference entity temperature difference, display instrument will indicate the thermocouple thermoelectric potential of the corresponding temperature value. Thermocouple is a kind of temperature sensor, it is smaller than the diameter of a prefabricated thermocouple, flexible, good vibration resistance, suitable for installation in the case of prefabricated thermocouple can't install, the company produces the thermocouple used to introduce thermocouple temperature measuring element, therefore, is accurate, sensitive, fast thermal response time, stable quality, long service life, etc.