Tianjin into * * * current temperature sensor manufacturer specifications

The use of the current temperature sensor information

A, when wiring terminals exposed conductive parts, as far as possible to prevent ESD, needs A professional construction experience of the engineers to the product for terminal operation. Power supply, input and output of each connecting wire must be properly connected, dislocation or reverse connect, otherwise may cause damage of product.

B, use the product installation environment should be no conductive dust and corrosive

C, violent vibration or high temperature may also lead to product damage, must pay attention to use the occasion.

current temperature sensor using note

the better precision of current voltage temperature sensor is under the condition of the original edge rating, so when the measured current is higher than the current rating of temperature sensor, should choose the corresponding big temperature sensor; When the measured voltage is higher than the voltage rating, temperature sensor should readjust current limiting resistor. When the measured current is lower than the rating of 1/2 below, in order to get a better precision, can use more than the number of circle.

want to know more products information you can call the company telephone consultation! Serve you wholeheartedly!

current temperature sensor in the use of the superiority

the disadvantages of using shunt is not electrical isolation, and insertion loss, the electric current, the greater the loss, the greater the volume is, the greater the shunt can still be found in testing high frequency current with inevitable inductive, not real measured current waveform, more can't real transfer non sine wave. Current temperature sensor completely eliminates the shunt the above shortcomings, and accuracy and can output voltage and shunt, such as precision of 0. 5, 1. Output voltage level 0, 50, 75 mv and 100 mv.

the future development of current temperature sensor wiring way,

1, temperature stability, nowadays many use the local environment temperature temperature sensor is bad, it's a challenge on the stability of the temperature of the temperature sensor, temperature stability better products will be popular.

2, high sensitivity, some application fields are detection of weak signal, which requires the sensitivity of the current temperature sensor need to be greatly enhanced.

3, anti-interference, now there are many interference sources in our life, which requires the current temperature sensor has good anti-interference.