Ultrasonic bimetallic thermometer in flow measurement in the unique advantages of large diameter pipes

Ultrasonic thermometer is controlled by microprocessor digital level instrument, in the process of measuring pulse ultrasonic consists of sensor, namely the transducer, the sound waves reflected surfaces by the same sensor after receiving, converted to electrical signals. And by sound waves between transmitting and receiving time to calculate the sensor to the distance of the object to be tested. Because of using non-contact measurement, the medium to be measured is almost unlimited. 6 rm magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

according to the measuring principle of ultrasonic bimetallic thermometer shows that ultrasonic bimetallic thermometer is a non-contact measurement means, the flow rate of the use of sensor measurement is the linear velocity of the fluid, so by the received ultrasound can detect the fluid velocity in the conversion to flow. Because in the process of measurement to avoid the analyte and the mutual contact so more practical and measurement is not easy to contact and observation of large diameter nozzle flow, and then install ultrasonic bimetallic temperature time don't need to stop the flow section pipe installation, can be installed on the outside of the pipe directly, flow can be achieved without blocking the measurement, no additional pressure loss in the measurement process. 6 rm magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer

you can also use an ultrasonic bimetallic thermometer can measure different diameter of pipe flow, are not subject to the pipe and the influence of wall thickness, and in the process of measuring pipe not affected by the transmission medium, as long as can carry on the ultrasonic sound fluid can flow, bimetallic thermometer so in addition to the common water, by other than can also to other fluid measurement method is not applicable to high temperature and high pressure, high viscosity fluid, the measurement of non-conductive liquids and corrosive liquid, greatly extended the scope of practical ultrasonic bimetallic thermometer. Thus the ultrasonic bimetallic thermometer in large diameter pipeline flow measurement has its unique advantages, is a kind of simple operation, reliable detection results of measurement, and low cost, has a very broad application prospects. But it is worth noting that due to the ultrasonic bimetallic thermometer sensor installation error can produce great influence on the result of the measurement, so the distance between the two sensors have very strict requirements, must conform to the provisions of the standard size. 6 the rm magnetic flap | | glass thermometer thermometer floating ball | | glass thermometer thermometer two-color thermometer