Will report to the police of the electric contact bimetallic thermometer

As the name implies electric contact bimetallic thermometer is one of the bimetallic thermometer. Electric contact bimetallic thermometer based on bimetallic temperature measuring system of inductive components in the temperature of the measured medium, the displacement of the corresponding elastic deformation, with the aid of tie rod and to amplify the transmission gear transmission mechanism, by the direction on the fixed gear ( Along with the contact) By the measured value on the dial indicator. At the same time, when its contact and setting a pointer ( The upper or lower limit) Contact ( Move off or close) Instantaneous, led to the disconnection or connection of control circuit in the system, in order to achieve the goal of automatic control and transmitting alarm. If buy two ceiling thermometer, please be sure to connect the terminal 2 and 3 to the first cap, connect the terminals 1 and 2 to the second limit. Refer to below. In electric contact bimetallic thermometer device of electric contact signal pin, the permanent magnet steel is equipped with adjustable, can increase the contact force and speed up the contact action, so that the contact point contact and reliable, eliminate arc, can effectively avoid the instrument due to working environment vibration or medium pressure pulsation contact frequently shut off. So the electric contact bimetallic thermometer has reliable operation, long service life, bigger contact switch power, etc. Electric contact bimetallic thermometer measurement system, indicator system, magnetic electric contact device, housing, adjustment device and connection box ( Connector) And so on. Stainless steel electric contact bimetallic thermometer corrode the stainless steel temperature and the temperature of a gas, liquid medium to the expected value signal, switching control circuit, to achieve automatic control of alarm. Normally, electric contact bimetallic thermometer meter with corresponding electrical devices, Such as relay and frequency converter, etc. ) To be measured, can ( Control) Temperature of gas and liquid medium by the instrument to achieve automatic control, and a letter ( Alarm) The purpose of. So the electric contact bimetallic thermometer is widely used in petroleum, chemical, metallurgical, power plant, machinery and other industrial department or supporting mechanical and electrical equipment.