WSS series bimetallic thermometer thermometer factory group the use of maintenance

1, WSS series bimetallic thermometer thermometer factory group in the process of safekeeping, installation, use and transportation, should try to avoid collision protection tube, do not make. To protect the tube bending and deformation. When installation, it is forbidden to twist the instrument shell. 2, instrument should be in - 30 ℃ ~ 80 ℃ environment temperature in normal work. 3, temperature instrument often work better in the scale range of 1/2 to 3/4 place. 4, bimetallic thermometer protecting tube immersed in the measured medium length must be greater than the length of the thermal components, generally greater than 100 mm in length, 0 50 ℃ range into greater than 150 mm in length, so as to ensure the accuracy of measurement. 5, all kinds of bimetallic thermometer should not be used to measure open containers within the medium temperature, electric contact thermometer should not be at work used in the control circuit of larger vibration occasions. 6, bimetallic thermometer in custody, use the installation and transportation, should avoid collision protection tube, do not make the protection tube bending variant and the table when the spanner is used. 7, thermometer in the case of normal use shall be regular inspection. Is every six months. Electric contact thermometer is not allowed to work under strong shock, so as not to affect the reliability of the contact.