Expert Thermocouple & RTD &Temperature Sensor Manufacturer.
XMT 7100 Temperature Controller PID
XMT 7100 Thermostat 110v Temperature Controller PID
| model | XMT-7100 |
| type | temperature controller |
| temperature range | -9999-9999C |
| size | 48*24*75(mm) |
| Power supply | 24V DC |
| graduation | B/S/K/N/E/J/T |
| material | PP |
| certificate | CE/ISO9001 |
Product Images Show
1. digital pid temperature controller Product Highlights
Thermocouple: T, R, J, B, S, K, E, Wre3-Wre25.
Thermo Resistor: Pt100, Cu50.
1 Relay output, 1 SSR controlled output.
Time proportional PID controlled output to either Relay or SSR
Three built-in algorithms that fit most control objects and various applications.
Temperature can be set to display in either Fahrenheit or Celsius degrees.
2. digital pid temperature controller Specifications
Supply voltage: 12V AC or DC
Power consumption: < 2 Watts.
Sampling speed: 4/sec.
SSR activated voltage: open circuit: 10V; short circuit: 40mA.
Accuracy: 0.2% of full scale.
LED Display: Red, 0.28 inch
Out of range indication: EEEE.
Ambient temperature requirements: 0 to 50 C (32 to 122 F)
Humidity requirement: < 85% RH.
Relay Contact: 220VAC, 3A.
Controller dimensions: 48 x 24 x 75 (mm).
Opening for installation: 44 x 20 (mm)
3. Panel Illustration and Description
1 -- AL, Relay J1 Indicator.
2 -- Select next parameter / value increment.
3 -- Selection previous parameter / value decrement.
4 -- Digit select / Auto tuning.
5 -- Setting / Confirm.
6 -- Output, controlled output indicator. (AT) Blinking during auto-tuning process.
7 Temperature reading, degrees F or degrees C (as chosen)
4. Parameter Setting
a) Press (SET) to enter setting mode.
b) Press (>), (v) and/or (^) to enter and select parameters.
c) Press (SET) again to confirm entry or selection.
i.) To enter initialization parameter setting mode press (SET), then enter code 0089, press
(SET) again.
Table 1 - Initialization Parameters
Symbol | Description | Range | Default | Setting | Comment |
Inty | Temperature Sensor Type | See table 2 | Pt100
| ||
Outy | Method of controlled output | 0,1,2 | 2 | Note 1
| |
CAty | PID algorithm | 0,1,2 | 0 | Note 2 | |
PSb | Temperature Sensor Correction | -100 to +100 degrees F, C | 0
| ||
rd | Heating = 0;Cooling = 1 | 0,1 | 0
| ||
CorF | Celsius =0;Fahrenheit = 1 | 0,1 | 0
| ||
End | Exit |
Table 2 - Temperature Sensor T ype
Symbol | Description | Range | Comment
|
t | T Thermocouple | -270 ~ 400 C | Internal Resistant |
r | R Thermocouple | -50 ~ 1768 C | Internal Resistant |
J | J Thermocouple | -210 ~ 1200 C | Internal Resistant |
WrE | WRe Thermocouple | 0 ~ 2300 C | Internal Resistant
|
b | B Thermocouple | 0 ~ 1820 C | Internal Resistant |
S | S Thermocouple | -50 ~ 1768 C | Internal Resistant |
K | K Thermocouple | -270 ~ 1372 C | Internal Resistant |
E | E Thermocouple | -270 ~ 1000 C | Internal Resistant |
P10.0 | P100 Thermo Resistor | -2.000 ~ 6.000 C | onstant Output
|
P100 | Pt100 Thermo Resistor | -200 ~ 600 C | onstant Output
|
Cu50 | Cu50 Thermo Resistor | -500 ~ 1500 C | onstant Output
|
Note 1:
0: Relay J1 Alarm output; SSR Disabled, normally used for upper lower limit alarm trigger control.
1: Relay J1 PID controlled output: SSR Disabled. Contact controlled output.
2: Relay J1 as alarm output; SSR PID controlled 12 Volt output. No Contact controlled output.
Note 2:
This controller has 3 types of auto-tuning control methods already built-in:
0: Universal PID control suitable for increase/decrease fast speed of change of temperature
application.
1: Gradual change PID control is suitable for applications that require steady change of
temperature and speed of temperature change is not critical.
2: Fuzzy logic control suitable for system with oscillation and sensing signal delay.
1. Payment ways?
T/T, PAYPAL, WESTERN UNION.
2. When will you arrange the production?
In 12 hours since we get your payment.
3. What is your main products?
Thermocouple, PT100 sensor, termperture controller, infared thermometer and so on.
4. Product certifications?
ISO9001, CE, ROHS, FDA, SGS and other certificates.
5. What kind of informations shall I give you regarding the shipping?
Company name, Recipients, Correct Address, telephone, zip code.
6. What is your warranty ?
For most of our products, the warranty will be 12 months.
7. When will I get a solution for defective products?
Within 48 hours (on working days )
8. What is your shipping way?
DHL, FEDEX, UPS, TNT, EMS, CHINA POST AIR, SEA FREIGHT and AIR FREIGHT!
9. What is your shipping time?
For General Orders, the shipping time will be 5 workdays.
CONTACT DETAILS
Phone: +86 13816377866
Email: jimmy011@126.com
Add:NO999, Sunqiao RD, Pudong area, Shanghai, China
CONTACT US FOR FREE SAMPLE !
For more products related question ,Welcome to inquiry us .
